Why a Tungsten Carbide Substrate
In certain applications, tungsten carbide offers unique benefits in terms of mechanical properties, including fracture toughness, overall strength and elasticity.
Tungsten carbide substrate is often required on integrally geared, high-speed pumps using a clamped-in mating ring. When the mating ring is clamped between two metallic surfaces, tungsten carbide’s mechanical properties allow it to withstand the clamping. Because of its superior mechanical properties, tungsten carbide can also withstand high-speed centrifugal forces without outside diameter support.
Adding John Crane Diamond® to a Tungsten Carbide Substrate
There are many applications in which adding a seal face technology such as John Crane Diamond to a tungsten carbide substrate can improve mechanical seal performance. Common problems to look for are failure mechanisms such as heat checking, ID chipping, heavy wear and blistering. If evidence of one of these failure conditions is prevalent, adding John Crane Diamond seal face technology to the tungsten carbide substrate can help address these challenges.
Benefits of John Crane Diamond
Diamond is nature’s hardest known substance which leads to reduced face wear. Its low coefficient of friction results in less heat generation. The combination of these two characteristics provides additional protection to seal faces, helping overcome the common challenges mentioned above and extending the life of the mechanical seal.
In addition to increasing the mean time between repair (MTBR), adding John Crane Diamond material to a tungsten carbide substrate provides environmental benefits. With less heat generated, the need for cooling water and auxiliary cooling equipment is also reduced, resulting in lower energy consumption and reduced water usage. Compounding these benefits are the associated cost reductions in water consumption, wastewater processing and power usage.
Diamond® Seal Face Technology | John Crane
John Crane Diamond® helps customers overcome common sealing challenges including abrasive fluids, low lubricity and intermittent dry running along with meeting environmental goals such as reducing water and power consumption.
Complete the following form, so we can help you with the best solution for your application. We’re at your service.