SealRyt@ Rotating Shaft Sealing Technology

SealRyt@ Rotating Shaft Sealing Technology

SealRyt Corp. is the industry leader in rotating shaft sealing technology. Our engineers have years of experience in the science of sealing. That’s why we hold multiple patents on sealing technology. That’s also why our products last longer, get better results, and simply seal better than any other products available.

Every sealing scenario is different but we have collected a few case studies that illustrate the drastic change in reliability and effectiveness of SealRyt® products.

Dissolving Tank Agitators

A PackRyt® Sealing System was installed on 4 hard coated shaft tank agitator units and they have been running trouble free for over 2 years.

Previously these units had shaft change outs every year at a cost of approximately $80,000.00.

Stock Pumps

A PackRyt® Sealing System was installed on a 3175 stock pump having extreme leakage and maintenance issues. The PackRyt® eliminated the problems. All pumps and agitators on the paper machine and the pulp dryer are now being considered for change out.

Fiber Line Equipment

A chip chute pump was being re-packed every 2 months and now with the PackRyt® Sealing System installed it has one annual packing change. The bearing has had a life span of over 5 years.

We have compiled a list of life span results from different equipment the PackRyt BLR has been installed.

Download the PackRyt Longevity Chart

Complete the following form, so we can help you with the best solution for your application. We’re at your service.

SEALRyt Packing

SEALRyt Packing

Premium Mechanical Packing

SealRyt® designs and manufactures the highest quality braided packing in the industry. Our products regularly out-perform  the competition because we engineer our packing specifically for the application. We also specialize in difficult applications and hard-to-manage mediums. Packing is sold by the pound.

otating shaft sealing

 
Complete the following form, so we can help you with the best solution for your application. We’re at your service.

Solving a Problem as Old as Pumps Themselves

PackRyt BearingsUnfortunately, shaft deflection still causes high leakage and rapid packing wear. With water costs soaring, this area of the pump has become critical. Mechanical seals are sometimes used but their fragile nature, high cost and labor-intensive change outs make them a marginal choice for economical operation, especially where impeller nose gap adjustments are required, if cavitation or water hammer events are a possibility, and when cost is a factor.

Image courtesy of empoweringpumps.com