A Complete Sealing Solution
Inpro/Seal Air Mizer® shaft seals eliminate product loss and contamination on industrial process equipment, decreasing maintenance and production costs.
The High Cost of Leaking Seals
Industrial process equipment often suffers from product leakage and contamination due to unreliable sealing. Conventional contact seals, such as mechanical packing, mechanical seals and lip seals, rely on dynamic mechanical contact to seal. Shaft movement and misalignment challenge contact sealing methods, causing them to wear out or groove the shaft. This leads to seal failure, causing higher production costs, increased maintenance, environmental concerns and unsafe working environments.
Eliminate Product Loss and Contamination
Inpro/Seal Air Mizer seals are permanent shaft seals for powders, liquids, slurries and bulk solids on industrial processing equipment, preventing product loss, harmful emissions and contamination. Due to their non-wearing design, Air Mizer shaft seals are maintenance-free and constructed to last the lifetime of your equipment. Unlike conventional contact seals, Air Mizer shaft seals fully articulate to accommodate radial run-out, axial movement and angular misalignment simultaneously.
Inpro/Seal AM (Air Mizer) Solutions are non-wearing, permanent shaft seals that utilizes a positive purge along the shaft to create an effective seal, preventing product or harmful emissions from escaping into atmosphere and contamination from entering the vessel. This unique technology can be installed on mixers, blenders and a variety of other rotating equipment.
INPRO / SEAL Inquiry Form
Complete the following form, so we can help you with the best solution for your application. We’re at your service.